402-IO is a replacement for Marine Air Systems Passport I/O Control Display. It is newly designed and manufactured. Cures annoying problems like sticking or non-operational buttons, bad LED segments or non-working displays.
The A-282 Control Board is part of a legacy DX & TW cabin control system sold from the late 1990s through the present, and was recently discontinued by the OEM. It was also sold into a specialty coach/RV application. This control board is a redesigned, newly manufactured, footprint-compatible replacement that operates identically. Replaces similar DX (Direct Expansion/Self Contained/Split Units) and TW (Chiller/Tempered…
A-548, Replacement To-3 Triac. This triac triggers the pumps when the A/C unit needs them on. This Trac is located inside of the Pump relay Box. Peak Voltage: 400V, Amperage: 35A.
Dometic Motor Starting Relay. Dealer Design Award Winner. Replacement for all standard potential relays - 50A. Input: 110-270 VAC Single Phase. Maximum Voltage Contact: 502 VAC (absolute). Motor Power Rating: Up to 10 HP.
Reduces the odors of tobacco smoke, mildew, mustiness, chemical vapors, and toilets, and inhale fresher, cleaner, healthier air virtually anywhere you go.
The Dometic Breathe Easy™ Replacement Kit is designed to replace the ultrviolet (UV) bulb and nano-mesh divider for Dometic Portable Breathe Easy™ air purifiers. Fits ONLY Dometic Portable Breathe Easy™ Air Purifiers (sold separately).
Dometic retrofit kit to upgrade older Marine Air or Cruisair mechanical controls to New SMXII/Q-Logic or Digital Controls using U-Board. Cables, SMXII or Digital Controls are sold separately.
For the products with no prices, please contact us for the price. CALL/MESSAGE FOR PRICE The CX Cable works to connect the SMX II AB control to the new generation units, new U-Board or A288-D board
For the products with no prices, please contact us for the price. CALL/MESSAGE FOR PRICE The in-duct Breathe Easy Air Purifier works silently and safely within the duct to reduce the odors of tobacco smoke, mildew, mustiness, chemical vapors and toilets, to provide you with fresher, cleaner, and healthier air on-board. The unit produces no harmful ozone and will not…
Dometic engineers designed the innovative Emerald Condensing Unit (DEU) series to harness and maximize the impressive performance of R-410A refrigerant while meeting all international clean air standards.
The Dometic Turbo Global Unit (DTG) series self-contained boat air conditioner is the replacement for the DTU. Rust-free molded composite drain pan has three drains for the rapid removal of condensate water.
Dometic – Marine Air Elite II Display Control – Display Only. Easy to use with raised buttons and scroll button for mode selection. Cool-only, heat-only, dehumidify and automatic mode. Automatic humidity control reduces moisture when the boat is unattended. Works with Dometic/Marine Air 8-Pin Cable
Control Keypads for MARINE AIR / DOMETIC direct expansion and chilled water / marine chiller units. Bezel Included. This model only works with 8 pin cable.
Discontinued Product has been discontinued. Please send us a message or click the below button for better replacement. CONTACT US FOR BEST REPLACEMENT R-type remote condensing units are seawater-cooled, reverse-cycle heat pumps for cooling and heating in marine applications, available in capacities from 10,000 to 48,000 BTU/hr (higher than 16 BTU only available in 230V).
DOMETIC’S highly customizable display. Compatible with Marine Air A/C Units and Cruisair Units with U-Board. Intuitive icons and menus for easy use, leads you through start-up and troubleshooting. Schedule start-up & shut-down times or temperature changes. CAN Bus compatible. Accommodates Vimar Eikon, Eikon Evo bezels. Works with the 8-pin data cable from Dometic.
The Dometic TurboVap series of direct expansion (DX) split-gas evaporators for boats is based on the revolutionary engineering advancements of the award-winning DTU units.
The Dometic VARC uses the advanced technology of an Electronic Expansion Valve (EEV). This provides more precise control of superheat across a broad range of conditions with no erratic swings as the valve reacts to changes in temperature and pressure. Using an advanced algorithm, superior heat control is maintained over extreme operating conditions.
The FX-1 Control Board is Micro-Air's long-standing cabin control standard for both self-contained & split DX systems and for CW air handlers. It supports the FX-1, FX-Maxx, and EasyTouch Control Displays.
The FX-1 Control Board is Micro-Air's long-standing cabin control standard for both self-contained & split DX systems and for CW air handlers. It supports the FX-1, FX-Maxx, and EasyTouch Control Displays.
The FX-2 Complete Feature Kit saves time, money and takes the guess work out of trying to figure out what components are needed for an upgrade or new build for your marine cabin control. Both the WIFI and non WIFI kits come with all compatible parts for easy installation and setup.
The FX-Maxx Control Display is Micro-Air's long-standing cabin control standard for both self-contained and split DX (Direct Expansion) systems and for CW (Chilled Water) air handlers.
The FX-Maxx Control Display Designer Series is a unique legacy offering only from Micro-Air. The Designer Series is functionally compatible with the standard FX-Maxx Control Display. It was originally introduced by request for high-end megayacht applications where decor and look were important.
The Hydromatic I (1) is the classic, legacy control system for multi-stage marine chillers. It has been sold for over 20 years and is installed on hundreds of boats around the world. Hydromatic I has stood the test of time because of its simple and robust operation.
The Hydromatic II / 2 is a new and advanced control system for multi-stage marine chillers. It employs the latest technology with CAN Bus networking capabilities and offers advanced control with many sensor monitoring options. It can also be configured for use with a color touch screen panel PC, built into a custom control electrical panel with power distribution wiring,…
The Hydromatic II is a new and advanced control system for multi-stage marine chillers. It employs the latest technology and CAN Bus networking capabilities, and offers many sensor monitoring and advanced control features. The Hydromatic II Pump Board is required to operate both the seawater and loop water pumps (one pump board per multi-stage system).
The Micro-Air MAQ board is a newly-manufactured, footprint-compatible, and functionally-compatible replacement control board for the popular Q-Logic cabin control used in marine applications. Its design, components, and reliability are superior to the OEM original. The MAQ supports all of the same displays, uses the same 6-pin RJ-12 (straight through) display cable, and the uses the same 3kohm thermistors. Fits Dometic / Cruisair…
The MMC Master Control Display is a fully-compatible replacement for the CWMC (DDC) control display offered with some Dometic / Marine Air Systems® chillers. The MCC Master control display is the companion for the MCC Master control board (DDC Control Board).
Micro Air Qht Display Control - Display Only. Easy to use with raised buttons and scroll button for mode selection. Cool-only, heat-only, dehumidify and automatic mode. Works with 6-Pin Cable, Bezel Included.
MSI 90 Degree Hose Elbow is made of ABS plastic. This hose style can be used anywhere along the air supply route. Outlet side includes a simple bump to assist in securing hose duct. Available in different sizes.
Air Conditioner Marine Grade Transition ABS Tee Duct Fitting - 4" Inlet with Adjustable Baffle - Air distribution Tee manufactured by MSI. Works with Dometic, Marine Air, and Cruisair air conditioner units. *Hose Adapter sold separately.
Air Conditioner Marine Grade Transition ABS Tee Duct Fitting - 5" Inlet with Adjustable Baffle - Air distribution Tee manufactured by MSI. Works with Dometic, Marine Air, and Cruisair air conditioner units. *Hose Adapter sold separately.
Air Conditioner Marine Grade Transition ABS Tee Duct Fitting - 6" Inlet with Adjustable Baffle - Air distribution Tee manufactured by MSI. Works with Dometic, Marine Air, and Cruisair air conditioner units. *Hose Adapter sold separately.
Air Conditioner Marine Grade Transition ABS Tee Duct Fitting - 7" Inlet with Adjustable Baffle - Air distribution Tee manufactured by MSI. Works with Dometic, Marine Air, and Cruisair air conditioner units. *Hose Adapter sold separately.
Air Conditioner Marine Grade Transition ABS Tee Duct Fitting - 8" Inlet with Adjustable Baffle - Air distribution Tee manufactured by MSI. Works with Dometic, Marine Air and Cruisair air conditioner units. *Hose Adapter sold separately.
The OEM EasyTouch™ Display Control is Micro-Air's the newest display control, and it employs the very latest microcontroller and TFT LCD technology. It has a user-friendly, 2.5" color, touch screen and is designed for use with direct expansion, reverse-cycle air conditioning systems or with chilled-water air handlers. This model is compatible with Dometic Passport I/O Board and U-Board.
Micro Air MCC Control Board works as a direct replacement for Dometic / Marine Air Circuit Board DDC 115 / 230V. The DDC Module is designed for use with single or multiple stage modular chiller assemblies to provide hot or cold water to air handlers while maintaining circulating water temperature at the desired setpoint.
BACK ORDERED UNTIL NOVEMBER NEW Micro-Air U-Board - Direct Replacement fits Dometic Control U-Board used in direct expansion, self-contained, and chiller systems. This board works with either 6 or 8 pin cables, and most Dometic, Cruisair, and Marine Air displays/controls.
Oberdorfer - 104M-06-10F36BJ 316 SS Centrifugal Pump with Motor. Inlet 3/4" - Outlet 1/2" - 25 GPM - 1/3 HP - 115/230V - 50/60 HZ - 1 Phase - Mechanical Seal Type - 24 lbs Weight. All bronze or corrosion resistant aluminum construction. The mechanical seal is a carbon and ceramic mechanical rotary face type for positive sealing. The stator is…
Oberdorfer - 109MB-J19 Centrifugal Pump with Motor - Inlet 1 1/4" - Outlet 1" - 60 GPM - 1/2 HP - 115/230V - 1 Phase - Mechanical Seal Type - 29 lbs Weight. All bronze or corrosion resistant aluminum construction. The mechanical seal is a carbon and ceramic mechanical rotary face type for positive sealing. The stator is made from molded nitrile.
Micro-Air 402-IO is a replacement for Marine Air Systems Passport I/O Control Display. It is newly designed and manufactured. Cures annoying problems like sticking or non-operational buttons, bad LED segments or non-working displays. Drop-in replacement for the Marine Air System Passport I/O Compact Control Display. Bezel Included.
Oberdorfer - 109MB-10J36BJ Centrifugal Pump with Motor - Inlet 1 1/4" - Outlet 1" - 60 GPM - 1/2 HP - 115/230V (50/60Hz) - 1 Phase - Mechanical Seal Type - 29 lbs Weight. All bronze or corrosion resistant aluminum construction. The mechanical seal is a carbon and ceramic mechanical rotary face type for positive sealing. Upgraded with 316 Passivated Stainless Steel…
Plastic Grilles design with rounded corners and paint-friendly materials, for use with Dometic systems. Hidden fasteners and a unique snap-in function put these modern styled grilles in an unchallenged class of their own. They are available in different sizes.
MARCH PUMPS MA AC-5C-MD 115V is an American seal-less centrifugal magnetic drive pump. - Polypropylene Plastic Pump Head and Impeller, 115V 50/60Hz Air Cooled Motor, Up To 17GPM, 1" FPT Inlet, 1/2" MPT Outlet, 3 Foot Power Cord with No Plug. Commonly used for marine air conditioning, chemical recirculation, and scrubber systems.
March Pump AC-5C-MD 230V is an American seal-less centrifugal magnetic pump. Plastic Pump Head and Impeller, 230V 50/60Hz Air Cooled Motor, Up To 17GPM, 1" FPT Inlet, 1/2"MPT Outlet, 3 Foot Power Cord with No Plug. Commonly used for marine air conditioning.
MARCH PUMPS MA LC-5C-MD 115V is an American submersible seal-less centrifugal magnetic drive pump - Mag-Drive Centrifugal Pump 115V 50/60HZ 14.5GPM (870 GPH) Open Air or Submersible 1" FPT Inlet, 1/2"MPT Outlet. Commonly used for marine air conditioning.
March Pump MA LC-5C-MD 230V is an American submersible seal-less centrifugal magnetic drive pump - 230V 50/60HZ 14.5GPM. It might be used submerged or not submerged. 1"FPT Inlet, 1/2"MPT Outlet. Commonly used for marine air conditioning and fountains.
MARCH PUMPS MA LC-2CP-MD is an American submersible seal-less centrifugal magnetic drive pump. 115V - 50/60 Hz - 5GPM (300 GPH) It might be used submerged or not submerged. 3/8" FTB and 3/4" MPT Inlet, 1/4" MPT Outlet. Commonly used for marine air conditioning and fountains.
MARCH PUMPS MA LC-2CP-MD 230V is an American submersible seal-less centrifugal magnetic drive pump. 230V - 50/60hz - 5GPM (300 GPH) OIt might be used submerged or not submerged. 3/8"FPT and 3/4"MPT Inlet, 1/4"MPT Outlet. Commonly used for marine air conditioning and fountains.
MARCH PUMPS MA LC-3CP-MD is an American submersible seal-less centrifugal magnetic drive pump. 115V - 50/60HZ - 8.5GPM (510 GPH) It might be used submerged or not submerged. 3/4"FPT Inlet, 1/2"MPT Outlet. It is rated up to 510 GPH (1930 LPH) flow and for heads up to 19 ft (4.3 m). Commonly used for marine air conditioning and fountains.
The MARCH PUMPS LC-3CP-MD 230V 50 HZ is a centrifugal magnetic drive pump, eliminating the need for a shaft seal. Pumps are serviceable with a screwdriver. The “LC” is hermetically encapsulated and liquid cooled which allows the pump to be run fully submerged or in the open air for complete moisture protection.
Retrofit kit package to upgrade older Marine Air or Cruisair 3-Knob mechanical control to New SMXII/Q-Logic using U-Board. This package includes: New Retrofit Kit, SMXII Display (bezel is optional), CX Cable, and Temperature Sensor Cable.
Retrofit kit package to upgrade older Marine Air or Cruisair 3-Knob mechanical control to New SMXIR using U-Board. This package includes: New Retrofit kit box with U-Board, SMXIR Display, CXP Cable, and Temperature Sensor.
The EasyTouch Display Control is Micro-Air’s newest display control, employing the very latest microcontroller and TFT LCD technology. It has a user-friendly, 2.5″ color, touch screen and is designed for use with direct expansion, reverse-cycle air conditioning systems or with chilled-water air handlers.
With Display Cover Plate is Discontinued Product has been discontinued. Please send us a message or click the below button for better replacement. CONTACT US FOR BEST REPLACEMENT SMX II BB (For Chillers) Keypad Display. Directly replaces the popular Dometic / Cruisair SMX II keypad display. Completely new designed and manufactured board. Fully compatible with original Dometic power (logic) boards. For Chiller Systems only.
SMX II AB Keypad Display. For Dometic / Cruisair SMX II AB keypad display. Completely new designed and manufactured board. Fully compatible with original Dometic power (logic) boards.
SMX II AB OEM Keypad Display (Brand New). Fits Dometic / Cruisair SMX II AB keypad display. Completely new designed and manufactured board. Fully compatible with original Cruisair/Dometic power (logic) boards. For Self Contained and Split Gas Units. For the chiller system SMX II keypad.
Discontinued Product has been discontinued. Please send us a message or click the below button for better replacement. CONTACT US FOR BEST REPLACEMENT NEW SMX II Keypad Cover Plate, Snap-on (Black or White). For Dometic and Crusair line SMX II AB Display.
The Micro Air A-288D circuit board / controller fits Dometic® / Cruisair® displays SMXht or SMXirb with technology SMXII, for SMX II controllers. Works with all SMX-II 6-pin standard control displays including the Micro-Air EasyTouch 589 (Dometic Smart Touch replacement). This control board is a redesigned, newly manufactured, footprint-compatible replacement that operates identically.
SMX ir display / keypad. Fully-compatible control display with the Dometic® / Cruisair® SMXir keypad. Smart, condensed housing with easy surface-mount installation. The large, easy-to-read LED displays cabin temperature, set point, programming prompts, and fault code warnings, and small LEDs and backlit text indicate system status. Compatible with legacy A-281, A-282 (SMX Online), and A-288 (SMXII) power/logic boards.
NEW Sound shield / cover for Turbo units (DTU, STX, VTD). Reduce compressor noise by another 3 to 5 decibels, or 50% more. Easy to install. Works for all Turbo models, including Dometic Turbo, Cruisair Stowaway Turbo, and Marine Air Vector Turbo. From 6k to 16k BTUs
The Standard EasyTouch™ Display Control is Micro-Air's the newest display control, and it employs the very latest microcontroller and TFT LCD technology. It has a user-friendly, 2.5" color, touch screen and is designed for use with direct expansion, reverse-cycle air conditioning systems or with chilled-water air handlers.
For the products with no prices, please contact us for the price. CALL/MESSAGE FOR PRICE MSI for Dometic / Cruisair / Webasto. Teak Return Air Wood Grilles. Attractive Teak grille to compliment beautiful yacht interior. Return-air grilles have easy-to-clean, replaceable filters. Various sizes (select below). TK/BRZ. Each grill is measured by it’s “cut-out” dimension. Ensure that you leave 1/2 inch…
For the products with no prices, please contact us for the price. CALL/MESSAGE FOR PRICE MSI for Dometic / Cruisair / Webasto. Teak Supply Air Wood Grilles (4 Way). Attractive Teak grille to compliment beautiful yacht interior. Supply-air grilles have easy-to-clean, replaceable filters. Various sizes (select below). Each grill is measured by it’s “cut-out” dimension. Ensure that you leave 1/2"…
NEW Temperature Sensor, RJ11, From 5 to 80 feet. Probe temperature Sensor for Marine Air Conditioning systems. Compatible with Dometic, Marine Air, Cruise Air, Webasto, and any other Self-Contain or Split Gas unit that uses RJ11 connector (Phone Jack connector) Reference: TSEP
The Dometic/Cruisair Tempered Water Logic Control (TWLC) is an advanced microprocessor chiller control designed for Dometic, Cruisair and Marine Air marine circulated water systems.
NEW Vimar Idea Round Bezel for Dometic Elite and SMXht Displays / Controls cover. Available in multiple colors. Dimensions: 4.84 x 3.23 in x .35 in (123 x 82 x 9 mm)
Remote Panel Control for Westerbeke Marine Generators. Comes equipped with Start/Stop Switch and Display. This Display will show Speed, Oil Pressure, Engine Temperature, Exhaust Temperature, Ext. Alarm, and Check Engine Light. This Panel Control works only for Westerbeke 3.5 KW to 10 KW Gas Generators.