PML250C – 230V / 50-60 HZ / 3 GPM


MARCH PUMPS MA LC-2CP-MD 230V is an American submersible seal-less centrifugal magnetic drive pump. 230V – 50/60hz – 5GPM (300 GPH) OIt might be used submerged or not submerged. 3/8″FPT and 3/4″MPT Inlet, 1/4″MPT Outlet. Commonly used for marine air conditioning and fountains.

SKU: 9108549752 Category:


MARCH PUMPS LC-2CP-MD Mag-Drive Centrifugal Pump 230V

March LC-2CP-MD is centrifugal magnetic drive pumps, eliminating the need for a shaft seal. Pumps can be serviced with a screwdriver. The “LC” model is hermetically encapsulated allowing the pump to run fully submerged or in open air for complete moisture protection. Model 2CP-MD must be run submerged only. See the parts list for a breakdown of parts. BC models have an encapsulated impeller magnet. Direct replacement for Dometic PML250 – 230V Part Number: 225500014


Pumps are not self-priming, lack a suction lift, and thus require a flooded suction. Pumps cannot be run dry because the impeller requires the liquid being pumped for lubrication. For liquids with a specific gravity greater than water, have a higher viscosity, or for elevated temperatures, a trimmed impeller may be necessary. For application assistance, contact March Pump.


Pumps are U.L. Recognized under File No. E80954. U.L. Recognition On Pumps Is For Water Only.
Models LC-2CP-MD 115 V & 230 V have a 6 ft (1.8 m) cord.


Inlet – Outlet: 3/8” FPT & 3/4” MPT – 1/4” MPT
Max Internal Pressure: 25 psi (172 kPa)
Max Liquid Temperature: 130 °F (54 °C)
Dimensions (inches): 4.13 x 4.87 x 6.11
Packed Weight (lbs): 5.20